BoBo Clock
BoBo Clock
BoBo Clock
BoBo Clock
BoBo Clock
BoBo Clock

BoBo Clock

Showing the time. Nothing more, nothing less.

Download the 3D model for free

We ask for your email to notify about potential updates to the 3D model and send information about products. Is this okay with you?


Required Components

The BoBo Clock was designed to work with these components. Perfect fit guaranteed.

Quantity must be 1 or more
Silent Quartz Movement
Quantity must be 1 or more


How to Assemble

Tools Min. Bed Size Suitable Materials
None 89×89 mm No Restrictions
Quantity must be 1 or more


Assembly

The assembly can be done in 2 minutes without using any screws or glue.

Step 1

The first step is to attach the legs to the back. This is done by inserting each leg, then twisting it 90 degrees to lock it in place.

 

Step 2

Now insert the shaft of the clock movement into the front, tightening it into place using the included nut. 

Step 3

Now attach the hour and minute hand onto the shaft. Most likely the holes will be too small due to deformation during printing. To solve for this just use a sandpaper/knife for a few seconds to enlarge the hole. Just be careful not to make the holes too big. Once the hands are attached move them both to midnight and then set the correct time using the dial on the back.

If you want you can add a minute hand to the clock as well. To do that take the red minute hand that comes with the clock movement and cut it down to a length that fits the clock.

Step 4

Insert the front part into the back of the clock. Remember to twist the front legs to such an angle that the prongs on the front can pass through. 

Step 5

In the final step you fixate the front to the back by rotating the front legs approximately 15 degrees as seen in the image. This will put part of the legs behind the prongs attached to the front, making the case impossible to disassemble. To detach the front you need to turn the legs to their previous position. Remember to avoid using force when twisting the legs, or else the prongs on the front might break.

And you're done! If you decide to make the clock please upload pictures. I'd love to see the results of using different colours and materials!

Download the 3D model for free

We ask for your email to notify about potential updates to the 3D model and send information about products. Is this okay with you?


Required Components

The BoBo Clock was designed to work with these components. Perfect fit guaranteed.

Quantity must be 1 or more
Silent Quartz Movement
Quantity must be 1 or more